LGN-65

Extraction of water from the bottom of tanks

• The pneumatic extractor-suction unit is particularly suitable for extracting water, including sludge and impurities within reach of the suction pipe, from all types of above-ground or underground tanks. The water is sucked in without creating turbulence, which prevents the water from remaining in suspension.
• It is characterised by the rapid separation of the aspirated liquid by decantation, with the possibility of returning the clean liquid and the contaminated liquid to the same tank in authorised containers.

Remove fuel from vehicles

• Quick and effective solution for vehicles that have been refueled with the wrong fuel. Diesel to petrol or vice versa.
• Suction is by means of a Ø12x9 mm and Ø8x6 mm probe inserted into the vehicle tank.

Cleaning of the manholes

• Indicator for the suction of liquids and sludge in petrol stations or other manholes.
• The unit easily sucks up sludge, hydrocarbon water and dirt left at the bottom of manholes.

Features and Technical Data:

• Pneumatic · without electric connection
• Required air flow of 200 l/min at 6 bar or suctioned flow of 400 l/min
• Suction creating the tank vacuum (-0.8 bar)
• Vacuum: It is possible to empty it by gravity, through a ball valve and a metre of hose installed in the tank bottom or creating a positive pressure in the tank (up to 0.9 bar). The 6 m hose is easy and quick to connect to the empty hose in order to delivery and empty the waste up to 7 m away.
• It is composed of a transparent vessel with a perfect vision of the suctioned liquid and dirt.
• It allows a vacuum retention of the tank to suction up to 50 litres without being connected to the air tube, with a suction capacity of 6-m height, allowing to work without air intake.
• It is suitable for diesel and petrol.
• Sealed security valve · tared at +1.5 bar
• Sealed valve that regulates the air intake · tared at 0.9 bar
• Air hose connection
• Minimum pressure: 6 bar

Equipped with:

• Vacuum gauge -1 +3 bar
• Level indicator
• Tank for the extracted fuel
• Transparent vessel with metallic protection housing
• Earth connection
• 5.5 m transparent hose with 1 m metallic galvanised lance
• 0.75 m M3/4” complete transparent drain hose
• 1.5 m Ø12x9 mm tank extraction probe
• 1.5 m Ø8x6 mm tank extraction probe
• Chassis with handle and back wheels

• Dim.: 550x510x1,140 mm (length x width x height)
• Weight: 36.45 kg

*Weight including accessories