AQÜIM :: shower control

Equipments Showers, footpaths, and accessories
 
A D02 - Column shower of 2 sides
Liquids: Water Water  

Monolithic shower of square section of 200x200 mm with two shower-heads.

 

Features:

Body:

  • Chassis with two parts in AISI 316 stainless steel of 2 mm of thickness with bright polished finish.
  •  Base of 370 mm diameter and 6 mm thickness, with drill holes to be fixed to the ground.
  •  The fixation is made with four stainless steel expansive stoppers Ø14 mm.

Shower-head:

  • Anti-vandalic
  • With flow regulator
  • Anticalcareous and tonic stream. 60% water saving.
  • Consumption: 7 l/min (either pressure)

Timer:

  • 12 VDC · Electronic
  • It has a support to place the card. When the card is placed, the water is running through the shower-head. When the card is removed, the water stops running. Then it is avoided the water is running when the user is not using the shower.
  • Electronic contrast display for a correct reading where there is a lot of light.
  • The display shows the balance in time the card has. When this balance is finished, it shows "balance finished, recharge the card", and the water does not run.
  • Electronic components completely compact and waterproof protected against the humidity and saline environment effects.
  • Frontal made of stainless steel with stainless steel screws for an easy maintenance and replacement if it is necessary.
A D02 - Column shower of 2 sides
A D02 - Column shower of 2 sides - Reduced Mobility

Equipment with similar features as the previous one, with one of its sides designed for a better use for people with reduced mobility (PRM).

 

It has built-in:

  • a handle in stainless steel
  • a seat in synthetic wood of high resistance and durability
A D02 - Column shower of 2 sides - Reduced Mobility
AS D02 - Solar Column Shower of 2 sides

Shower with the same features as the model "A D02" with the addition of a solar plate with 12 VDC feeding.

The feeding of the controller through a solar plate allows the shower installation where there is no electric cable system, saving the installation costs.

AS D02 - Solar Column Shower of 2 sides
AS D02 - Solar Column Shower of 2 sides - Reduced Mobility
AS D02 - Solar Column Shower of 2 sides - Reduced Mobility
A L02 - Footpath of 2 sides
Liquids: Water Water  

AQÜIM FOOTPATH OF 2 SIDES · 12 VDC

Monolithic footpath of square section of 200x200 mm, with two shower-heads.

 

Features:

Body:

  • Chassis with two parts in AISI 316 stainless steel of 2 mm of thickness with bright polished finish.
  • Base of 370 mm diameter and 6 mm thickness, with drill holes to be fixed to the ground.
  • The fixation is made with four stainless steel expansive stoppers Ø14 mm.
  • Footrest made with the same stainless steel sheet.

Shower-head:

  • Anti-vandalic
  • With flow regulator
  • Anticalcareous and tonic stream. 60% water saving.
  • Consumption: 7 l/min (either pressure)

Timer:

  • 12 VDC · Electronic
  • It has a support to place the card. When the card is placed, the water is running through the shower-head. When the card is removed, the water stops running. Then it is avoided the water is running when the user is not using the shower.
  • Electronic contrast display for a correct reading where there is a lot of light.
  • The display shows the balance in time the card has. When this balance is finished, it shows "balance finished, recharge the card", and the water does not run.
  • Electronic components completely compact and inserted into a cubicle of resines to isolate and avoid the humidity and saline environment effects.
  • Frontal made of stainless steel with stainless steel screws for an easy maintenance and replacement if it is necessary.
A L02 - Footpath of 2 sides
AS L02 - Solar Footpath of 2 sides

Footpath with the same features as the previous one with the addition of a solar plate with 12 VDC feeding.

The feeding of the controller through solar plate allows the installation of the equipment where there is no electric cable system, saving the installation costs.

AS L02 - Solar Footpath of 2 sides
R01T - Charger
  • The card charger is placed where there is a quick access to the adjacent showers, such as pubs, beach bars, tourism offices, etc.
  • The user places the card and put the coins according to the time he/she wants to charge.
  • It is designed to avoid problems with the humidity and sand.
  • The equipment resists wet cards, with sand and/or dirt.
  • Internal modem with automatic warnings of the level of coins through telematic communication.
R01T - Charger
ATP1C - proximity cards

Proximity cards:

  • The equipments have no slots or holes to avoid the water, sand, or dirt entry.
  • These cards have an internal chip which is detected at short distance.
  • The cards are delivered silk-screen printing and programmed with an initial balance.
  • It will be made the graphic design of the card face following the indications of the Council or the company in charge.
  • In the other face of the card it can be printed publicity, or the information what you want.
ATP1C - proximity cards

©2008 GESPASA · TOT COMERCIAL S.A. · NIF A25031154 · Partida Horta d’Amunt s/n · Apartat de Correus núm. 149 · E-25600 · BALAGUER (Lleida) SPAIN
Tel.: ++34 (9)73 45 10 72 · Fax: ++34 (9)73 44 50 00 - 44 84 00 · Legal Note · www.cenics.net

Valid XHTML 1.0 Strict